Articole

Rada, E.C., Ragazzi, M., Cioca, L.I., Ionescu, G., Ranieri, E., Trulli, E. Renewable energy in the Alps: A case study (2017) Quality - Access to Success, 18, pp. 151-156.

Rada, E.C., Venturi, M., Ragazzi, M., Apostol, T., Stan, C., Marculescu, C. Bio-drying role in changeable scenarios of Romanian MSW management (2010) Waste and Biomass Valorization, 1 (2), pp. 271-279.

Rada, E.C., Squazardo, L., Ionescu, G., Badea, A. Economic viability of srf co-combustion in cement factory (2014) UPB Scientific Bulletin, Series D: Mechanical Engineering, 76 (3), pp. 199-206.

Rada, E.C., Ragazzi, M., Ionescu, G., Merler, G., Moedinger, F., Raboni, M., Torretta, V. Municipal Solid Waste treatment by integrated solutions: Energy and environmental balances (2014) Energy Procedia, 50, pp. 1037-1044.

Rada, E.C., Ragazzi, M., Apostol, T. Role of Refuse Derived Fuel in the Romanian industrial sector after the entrance in EU (2008) WIT Transactions on Ecology and the Environment, 109, pp. 89-96

Rada, E.C., Ragazzi, M., Panaitescu, V., Apostol, T. Some research perspectives on emissions from bio-mechanical treatments of municipal solid waste in Europe (2005) Environmental Technology, 26 (11), pp. 1297-1302

Stroe, C.-C., Panaitescu', V.N., Ragazzi, M., Rada, E.C., Ionescu, G. Some considerations on the environmental impact of highway traffic (2014) Revista de Chimie, 65 (2), pp. 152-155.

Ionescu, R.D., Ragazzi, M., Battisti, L., Rada, E.C., Ionescu, G. Potential of electricity generation from renewable energy sources in standard domestic houses (2013) WIT Transactions on Ecology and the Environment, 176, pp. 245-253

Ionescu, G., Mǎrculescu, C., Badea, A. Alternative solutions for MSW to energy conversion (2011) UPB Scientific Bulletin, Series C: Electrical Engineering, 73 (3), pp. 243-254.

Ionescu, C., Baracu, T., Vlad, G.-E., Necula, H., Badea, A. The historical evolution of the energy efficient buildings (2015) Renewable and Sustainable Energy Reviews, 49, pp. 243-253.

Ionescu, F., Bulac, C., Pisicǎ, I., Tristiu, I., Toma, L. An evolutionary programming application to optimal reactive power dispatch (2010) UPB Scientific Bulletin, Series C: Electrical Engineering, 72 (1), pp. 91-100.

Torretta, V., Ionescu, G., Raboni, M., Merler, G. The mass and energy balance of an integrated solution for municipal solid waste treatment (2014) WIT Transactions on Ecology and the Environment, 180, pp. 151-161.

Brignoli, M., Espa, P., Quadroni, S., Torretta, V., Ionescu, G. Environmental impact of reservoir desilting operation (2015) UPB Scientific Bulletin, Series D: Mechanical Engineering, 77 (2), pp. 257-270.

Patraşcu, R., Minciuc, E., Tuţicǎ, D., Norişor, M., Ionescu, G., Stefani, P. Reducing environmental impact through efficient utilisation of biomass in a cogeneration plant case study - energy supply of an industrial company through biomass utilisation in a cogeneration plant with internal combustion engines (2014) Quality - Access to Success, 15 (138), pp. 84-88.

Marculescu, C., Stan, C. Non-oxidant thermal treatment for organic waste neutralization (2012) Energy Procedia, 18, pp. 545-551.

Marculescu, C., Stan, C. Poultry processing industry waste to energy conversion (2011) Energy Procedia, 6, pp. 550-557.

Marculescu, C., Stan, C. Pyrolysis treatment of poultry processing industry waste for energy potential recovery as quality derived fuels (2014) Fuel, 116, pp. 588-594.

Marculescu, C., Badea, A., Dinca, C., Gheorghe, C. Biomass to syngas conversion by pyro-gasification process (2009) Proceedings of the 3rd WSEAS International Conference on Energy Planning, Energy Saving, Environmental Education, EPESE '09, Renewable Energy Sources, RES '09, Waste Management, WWAI '09, pp. 430-433.

Stan, C., Apostol, T., Paraschiv, G., Pásztai, Z. Two solutions for MSW treatment in view of landfill minimization and energy recovery maximization (2014) UPB Scientific Bulletin, Series D: Mechanical Engineering, 76 (4), pp. 247-256.

Meghea, I., Mihai, M., Lacatusu, I., Apostol, T. Time series model applied to environmental monitoring data analyses (2012) Journal of Environmental Protection and Ecology, 13 (2), pp. 426-434

Meghea, I., Mihai, M., Lacatusu, I., Apostol, T. Environmental monitoring of co emissions: Statistical character of acquired data (2009) Environmental Engineering and Management Journal, 8 (3), pp. 575-582.

Badea, A., Dinca, C., Apostol, T. Evaluation of fossil fuel power plants with CO2 recovery (2010) Proceedings of the International Conference on Energy and Environment Technologies and EquipmProceedings of the International Conference on Energy and Environment Technologies and Equipment, EEETE '10, pp. 159-167.

Badea, A.A., Vodǎ, I., Dincǎ, C.F. Comparative analysis of coal, natural gas and nuclear fuel life cycles by chains of electrical energy production (2010) UPB Scientific Bulletin, Series C: Electrical Engineering, 72 (2), pp. 221-238.

Cocârtǎ, D., Badea, A., Ragazzi, M., Apostol, T. Methodology for the human health risk assessment from the thermoelectric plants (2008) UPB Scientific Bulletin, Series C: Electrical Engineering, 70 (1), pp. 41-50.

Dinca, C., Badea, A., Marculescu, C., Gheorghe, C. Environmental analysis of biomass combustion process (2009) Proceedings of the 3rd WSEAS International Conference on Energy Planning, Energy Saving, Environmental Education, EPESE '09, Renewable Energy Sources, RES '09, Waste Management, WWAI '09, pp. 234-238.

Dinca, C., Rousseaux, P., Badea, A. A life cycle impact of the natural gas used in the energy sector in Romania (2007) Journal of Cleaner Production, 15 (15), pp. 1451-1462

Negoi, R., Badea, A., Mǎrculescu, C. CFBC pilot installation with advanced flue gas purge system (2011) UPB Scientific Bulletin, Series C: Electrical Engineering, 73 (1), pp. 223-234.

Dinu, R., Badea, A., Apostol, T., Minciuc, E., Marculescu, C. Emissions analysis of high temperature air combustion of wood pellets (2008) UPB Scientific Bulletin, Series C: Electrical Engineering, 70 (2), pp. 91-102.

Tanasiev, V., Badea, A., Dinca, C., Necula, H. Intelligent system concept for high-energy performance and adaptable user comfort (2015) Advances in Intelligent Systems and Computing, 1089, pp. 175-180.

Tanasiev, V., Necula, H., Costinas, S., Sava, G., Badea, A. Achieving energy savings and thermal comfort through intermittent heating in very low energy buildings (2015) 2015 IEEE 15th International Conference on Environment and Electrical Engineering, EEEIC 2015 - Conference Proceedings, art. no. 7165518, pp. 2183-2188.

Tanasiev, V., Badea, A. Energy efficiency through intelligent management of building equipment (2012) UPB Scientific Bulletin, Series C: Electrical Engineering, 74 (1), pp. 49-56.

Balan, O.M., Buga, M.-R., Brunot, A., Badea, A., Froelich, D. Technical and economic evaluation of Power-to-Gas in link with a 50 MW wind park (2016) Journal of Energy Storage, 8, pp. 111-118.

Baracu, T., Costinas, S., Ghiaus, C., Badea, A., Avram, R., Vladulescu, F., Jugravescu, D. New analytical methodologies for radiative heat transfer in enclosures based on matrix formalism and network analogy (2016) Applied Thermal Engineering, 107, pp. 1269-1286.

Pascu, A., Stoica, L., DincǍ, C., Badea, A. The package type influence on the performance of the Co<inf>2</inf> capture process by chemical absorption (2016) UPB Scientific Bulletin, Series C: Electrical Engineering, 78 (1), pp. 259-270.

Vasile, V., Necula, H., Badea, A., Revellin, R., Bonjour, J., Haberschill, P. Experimental analysis on rheological and heat transfer characteristics of paraffin/water emulsion (2016) Refrigeration Science and Technology, 2016-January, pp. 32-40.

Stegaru, S.C., Sluşanschi, E.I., ŢǍpuş, M., CǍruţaşiu, M.-B., Ionescu, C., Badea, A. The influence of genetic operators in a Genetic Algorithm used for estimating the energy consumption in a Passive House (2015) 2015 14th RoEduNet International Conference - Networking in Education and Research, RoEduNet NER 2015 - Proceedings, art. no. 7312004, pp. 248-252.

Carutasiu, M.-B., Tanasiev, V., Ionescu, C., Danu, A., Necula, H., Badea, A. Reducing energy consumption in low energy buildings through implementation of a policy system used in automated heating systems (2015) Energy and Buildings, 94, art. no. 5741, pp. 227-239.

Căruţaşiu, M.-B., Ionescu, C., Necula, H., Badea, A. The efficient management of thermal energy gained in a low energy building (2015) Quality - Access to Success, 16 (148), pp. 91-95.

Mamut, T., Badea, A. Smart power generation in wastewater treatment plants (2015) UPB Scientific Bulletin, Series C: Electrical Engineering, 77 (1), pp. 255-268

Danu, A., Tanasiev, V., Ionescu, C., Badea, A. Influence of tilt and orientation angle of the PV panels on high-energy production in Romanian climate conditions during cold season (2015) 2015 IEEE 15th International Conference on Environment and Electrical Engineering, EEEIC 2015 - Conference Proceedings, art. no. 7165410, pp. 1599-1604.

Vlad, G.E., Ionescu, C., Necula, H., Badea, A. Analysis of an air-to-air heat exchanger designed for the mechanical ventilation system of a house (2014) UPB Scientific Bulletin, Series C: Electrical Engineering, 76 (1), pp. 287-296.

Vlad, G.E., Ionescu, C., Necula, H., Badea, A. Simulation of an air heating/cooling system that uses the ground thermal potential and heat recovery (2013) UPB Scientific Bulletin, Series C: Electrical Engineering, 75 (3), pp. 239-246.

Vlad, G.-E., Ionescu, C., Necula, H., Badea, A. Thermoeconomic design of an earth to air heat exchanger used to preheat ventilation air in low energy buildings (2011) Recent Researches in Energy, Environment, Entrepreneurship, Innovation - International Conference on Energy, Environment, Entrepreneurship, Innovation, ICEEEI'11, pp. 11-16.

Croitoru, A.-M., Badea, A. Water cooling of photovoltaic panels from passive house located inside the University Politehnica of Bucharest (2013) UPB Scientific Bulletin, Series C: Electrical Engineering, 75 (3), pp. 277-290.

Tutica, D., Badea, A., Darie, G. Chp functionality in the case of energy market tendencies (2013) UPB Scientific Bulletin, Series C: Electrical Engineering, 75 (4), pp. 263-268.

Feidt, M., Tutica, D., Badea, A. Energy versus environment (2012) UPB Scientific Bulletin, Series C: Electrical Engineering, 74 (1), pp. 117-126.

Varlam, M., Culcer, M., Enache, A., Raceanu, M., Iliescu, M., Badea, A., Balan, M., Stefanescu, I. Draft: Management unit for the use of renewable energy sources in a residential application (2011) EFC 2011 - Proceedings of the 4th European Fuel Cell Piero Lunghi Conference and Exhibition, pp. 423-424

Pintea, A., Wang, H., Christov, N., Borne, P., Popescu, D., Badea, A. Optimal control of variable speed wind turbines (2011) 2011 19th Mediterranean Conference on Control and Automation, MED 2011, art. no. 5983056, pp. 838-843.

Petcu, H.-I., Badea, A. Theoretical and experimental assessment of stationary and dynamic running of one flat plate solar collector (2010) UPB Scientific Bulletin, Series C: Electrical Engineering, 72 (2), pp. 257-266.

Hazi, A., Badea, A., Hazi, Gh., Necula, H., Grigore, R. Exergy evaluation of renewable use in the pulp and paper industry (2009) 2009 IEEE Bucharest PowerTech: Innovative Ideas Toward the Electrical Grid of the Future, art. no. 5281935.

Hazi, A., Badea, A., Hazi, Gh., Necula, H., Grigore, R. Increase of paper mill energy efficiency by optimization energy supply system industry (2009) 2009 IEEE Bucharest PowerTech: Innovative Ideas Toward the Electrical Grid of the Future, art. no. 5281938, .

Grigore, R., Badea, A., Hazi, G. Studies concerning the maintenance optimization of power plant steam condenser (2008) Annals of DAAAM and Proceedings of the International DAAAM Symposium, pp. 565-566.

Cenusa, V.E., Feidt, M., Benelmir, R., Badea, A. Optimising combined cycle with one or two steam pressure levels and heat recovery generator with imposed transfer area [Optimisation des cycles combinés gaz/vapeur avec un ou deux niveaux de pression et chaudière à surface d'échange imposée] (2006) Oil and Gas Science and Technology, 61 (2), pp. 225-235.

Cenuşǎ, V.-E., Badea, A., Feidt, M., Benelmir, R. Exergetic optimization of the heat recovery steam generators by imposing the total heat transfer area (2004) International Journal of Thermodynamics, 7 (3), pp. 149-156.

Cormos, A.-M., Dinca, C., Cormos, C.-C. Multi-fuel multi-product operation of IGCC power plants with carbon capture and storage (CCS) (2015) Applied Thermal Engineering, 74, pp. 20-27.

Cormos, C.-C., Dinca, C. Assessment of mass and energy integration aspects for IGCC power plants with carbon capture and storage (CCS) (2013) Studia Universitatis Babes-Bolyai Chemia, (1), pp. 117-131.

Dobre, A., Andreescu, C.N., Stan, C. The influence of the current intensity on the damping characteristics for a magneto-rheological damper of passenger car (2016) IOP Conference Series: Materials Science and Engineering, 147 (1), art. no. 012110, .

Seritan, G., Tristiu, I., Ceaki, O., Boboc, T. Power quality assessment for microgrid scenarios (2016) Proceedings of the 2016 International Conference and Exposition on Electrical and Power Engineering, EPE 2016, art. no. 7781434, pp. 723-727.

Toader, C., Porumb, R., Bulac, C., Tristiu, I. A perspective on current unbalance in low voltage distribution networks (2015) 2015 9th International Symposium on Advanced Topics in Electrical Engineering, ATEE 2015, art. no. 7133903, pp. 741-746.

Bulac, C., Triştiu, I., Mandiş, A., Toma, L. On-line power systems voltage stability monitoring using artificial neural networks (2015) 2015 9th International Symposium on Advanced Topics in Electrical Engineering, ATEE 2015, art. no. 7133884, pp. 622-625.

Bulac, C., Diaconu, C., Eremia, M., Otomega, B., Pop, I., Toma, L., Tristiu, I. Power transfer capacity enhancement using SVC (2009) 2009 IEEE Bucharest PowerTech: Innovative Ideas Toward the Electrical Grid of the Future, art. no. 5281833.

Costinaş, S., Nemeş, C., Triştiu, I., Sava, G.N. Quality cost of power supply and pay-back capital of this (2014) 2014 International Conference on Optimization of Electrical and Electronic Equipment, OPTIM 2014, art. no. 6850969, pp. 124-129.

Tristiu, I., Eremia, M., Bulac, C., Toma, L. Multi-criteria reconfiguration of distribution electrical networks for minimization of power losses and damage cost due to power supply interruption (2007) 2007 IEEE Lausanne POWERTECH, Proceedings, art. no. 4538348, pp. 385-390.

Boamba, C.E., Mirea, C., Eremia, M., Tristiu, I.Influence of renewable sources on Romanian power system (2014) UPB Scientific Bulletin, Series C: Electrical Engineering, 76 (4), pp. 191-198.

Porumb, R.F., Triştiu, I. Probabilistic characterization of distribution systems with distributed generation (2012) Advances in Energy Research: Distributed Generations Systems Integrating Renewable Energy Resources, pp. 37-99.

Bucǎtaru, G.C., Triştiu, I., Golovanov, N., Bulac, C., Mandiş, A. Vulnerability aria to disturbance in electricity network (2012) UPB Scientific Bulletin, Series C: Electrical Engineering, 74 (1), pp. 163-172.

Bucǎtaru, G.C., Triştiu, I., Golovanov, N. Vulnerability aria to disturbance in electricity network (2011) UPB Scientific Bulletin, Series C: Electrical Engineering, 73 (4), pp. 309-318.

Moiceanu, G., Voicu, G., Musuroi, G., Paraschiv, G., DincǍ, M.N., Ipate, G., Chiţoiu, M. Energy consumption evaluation during mechanical processing of agricultural vegetal biomass (2016) UPB Scientific Bulletin, Series D: Mechanical Engineering, 78 (3), pp. 215-222.

Moiceanu, G., Voicu, G., Paraschiv, G., Poenaru, I.C., Pirnǎ, I. Some physical-biological characteristics of miscanthus energetic plant stalks [Unele caracteristici fizico-biologice ale tulpinilor plantei energetice miscanthus] (2012) INMATEH - Agricultural Engineering, 38 (3), pp. 53-58.

Paraschiv, G., Manole, C. Explaining the phenomenon of separation into fractions of a mixture of particulate matter by applying the principle of minimum energy [Explicarea fenomenului de separare în fracţii a unui amestec de particule materiale în baza aplicării principiului energiei minime](2015) INMATEH - Agricultural Engineering, 45 (1), pp. 65-70.

Covaliu, C.I., Paraschiv, G., Biriş, S.-S., Jitaru, I., Vasile, E., Diamandescu, L., Velickovic, T.C., Krstic, M., Ionita, V., Iovu, H., Matei, E. Maghemite and poly-dl-alanine based core-shell multifunctional nanohybrids for environmental protection and biomedicine applications (2013) Applied Surface Science, 285 (PARTA), pp. 86-95.

Cioca, L.-I., Ivascu, L., Rada, E.C., Torretta, V., Ionescu, G. Sustainable development and technological impact on CO<inf>2</inf> reducing conditions in Romania (2015) Sustainability (Switzerland), 7 (2), pp. 1637-1650.

Ionescu, C.F., Bulac, C., Triştiu, I., Mandiş, A. Application of Mixed-Integer Hybrid Differential Evolution to optimal reactive power dispatch (2012) UPB Scientific Bulletin, Series C: Electrical Engineering, 74 (1), pp. 155-162.

Torretta, V., Raboni, M., Copelli, S., Rada, E.C., Ragazzi, M., Ionescu, G., Apostol, T., Badea, A. Application of strategies for particulate matter reduction in urban areas: An Italian case (2013) UPB Scientific Bulletin, Series D: Mechanical Engineering, 75 (4), pp. 221-228.

Torretta, V., Ionescu, G. Environmental assessment of the MSW treatment from the transport point of view (2016) Management of Environmental Quality, 27 (4), pp. 419-426.

Zanoni, S., Stefani, P., Ionescu, G., Zambelli, P. Assessing some criticalities of particulate matter exposure in an urban context (2014) WIT Transactions on Ecology and the Environment, 191, pp. 1391-1402.

Ciuta, S., Apostol, T., Rusu, V. Urban and rural MSW stream characterization for separate collection improvement (2015) Sustainability (Switzerland), 7 (1), pp. 916-931.

Badea, A.A., Dincǎ, C.F. CO 2 capture from post-combustion gas by employing MEA absorption process - Experimental investigations for pilot studies (2012) UPB Scientific Bulletin, Series D: Mechanical Engineering, 74 (1), pp. 21-32.

Badea, A., Baracu, T., Dinca, C., Tutica, D., Grigore, R., Anastasiu, M. A life-cycle cost analysis of the passive house "POLITEHNICA" from Bucharest (2014) Energy and Buildings, 80, pp. 542-555.

Cocârţǎ, D.M., Badea, A., Antonacci, G., Cemin, A. Two case studies of particulate matter emissions from power plants (2011) Environmental Engineering and Management Journal, 10 (5), pp. 615-619.

Dincǎ, C., Badea, A.-A., Apostol, T., Lžřoiu, G. GHG emissions evaluation from fossil fuel with CCS (2009) Environmental Engineering and Management Journal, 8 (1), pp. 81-89

Dinca, C., Badea, A., Tanasiev, V., Necula, H. Life Cycle Assessment of Circulating Fluidized Bed Combustion with CO2 Post-Combustion Capture (2015) Advances in Intelligent Systems and Computing, 1089, pp. 113-120.

Dinca, C., Badea, A., Necula, H. High performance of the CFBC pilot plant with CO2 chemical absorption by optimizing the absorber parameters (2013) Advanced Materials Research, 746, pp. 3-8.

Dinca, C., Badea, A. The parameters optimization for a CFBC pilot plant experimental study of post-combustion CO<inf>2</inf> capture by reactive absorption with MEA (2013) International Journal of Greenhouse Gas Control, 12, pp. 269-279

Dincǎ, C., Badea, A., Apotol, T. Life cycle impact assessment of fossil fuels (2010) UPB Scientific Bulletin, Series C: Electrical Engineering, 72 (1), pp. 115-126.

Dinca, C., Badea, A., Stoica, L., Pascu, A. Absorber design for the improvement of the efficiency of postcombustion CO<inf>2</inf> capture (2015) Journal of the Energy Institute, 88 (3), pp. 304-313.

Negoi, R., Badea, A., Romeo, L.M., Bolea, I., Dincǎ, C. Two steps configuration for MEA regeneration in a CO<inf>2</inf> capture system [Douǎ etape de configurare pentru regenerarea MEA într-un sistem de captare a CO<inf>2</inf>] (2012) EEA - Electrotehnica, Electronica, Automatica, 60 (2), pp. 24-29.

Baracu, T., Croitoru, A.-M., Badea, A. Theoretical investigations of the solar radiation at location of the passive house Politehnica from Bucharest (2014) UPB Scientific Bulletin, Series C: Electrical Engineering, 76 (4), pp. 255-266.

Baracu, T., Tanasiev, V., Mamut, T., Streche, C., Badea, A. A transient thermal analysis by thermal networks of the Passive House 'POLITEHNICA' from Bucharest (2013) International Journal of Sustainable Building Technology and Urban Development, 4 (2), pp. 146-159.

Pascu, A., Badea, A., Dinca, C., Stoica, L. Simulation of polymeric membrane in Aspen Plus for CO<inf>2</inf> post-combustion capture (2014) Engineering Optimization IV - Proceedings of the 4th International Conference on Engineering Optimization, ENGOPT 2014, pp. 303-308.

Cormos, A.-M., Morar, A., Dinca, C. Evaluation of CO<inf>2</inf> capture using aqueous ammonia solution in a flexible operation scenario (2014) Chemical Engineering Transactions, 39 (Special Issue), pp. 1297-1302.

Toma, L., Eremia, M., Bulac, C., Triştiu, I. Optimizing the costs of reactive power for the coordinated voltage control service (2011) 2011 IEEE PES Trondheim PowerTech: The Power of Technology for a Sustainable Society, POWERTECH 2011, art. no. 6019182.

Felegeanu, D.-C., Paraschiv, G., Panainte-Lehăduş, M., Horubet, M., Belciu, M., Radu, M., Turcu, O.L. A combined method for the analysis and assessment of risks and industrial safety (2016) Environmental Engineering and Management Journal, 15 (3), pp. 553-562.

Manea, D., Voicu, G., Paraschiv, G., Marin, E. Theoretical researches on kinematics of cam - Rocker mechanisms from seed drills transmission (2016) UPB Scientific Bulletin, Series D: Mechanical Engineering, 78 (2), pp. 199-210.

Manea, D., Voicu, G., Paraschiv, G., Marin, E. Experimental comparative study between two types of mechanism used in grassland drills transmission [Studiu comparativ experimental între două tipuri de mecansime utilizate în transmisia maşinilor de regenerat pajişti] (2015) INMATEH - Agricultural Engineering, 47 (3), pp. 5-12.

Petrescu, V., Paraschiv, G., Dobrotă, D. The optimization of welding regime parameters at shielded metal arc welding (SMAW) by mathematical modelling (2016) Metalurgija, 55 (2), pp. 217-220.

Moiceanu, G., Voicu, G., Dincă, M., Ferdeş, M., Paraschiv, G., Vlăduţ, V., Toma, L. Influence of different types of substrate on the anaerobic fermentation process (2016) Romanian Biotechnological Letters, 21 (2), pp. 11281-11289.

Moiceanu, G., Voicu, G., Paraschiv, G., Dinca, M., Chitoiu, M., Vlădut, V. Mechanical properties of energetic plant stems - review [Proprietăţile mecanice ale tulpinilor plantelor energetice - review] (2015) INMATEH - Agricultural Engineering, 45 (1), pp. 149-146.

Moiceanu, G., Voicu, G., Paraschiv, G., Voicu, P. Cutting resistance of miscanthus plants using v shaped blades with opening of 50 degrees and different sharpening angles (2013) Engineering for Rural Development, pp. 509-515.

Moiceanu, G., Gheorghe, V., Paraschiv, G., Poenaru Ion, C., Maican, E. Physical characteristics of miscanthus plants and power demand at grinding process (2012) Engineering for Rural Development, 11, pp. 222-227

Poenaru, I.-C., Cardei, P., Voicu, G., Paraschiv, G., Dinca, M., Vladut, V., Matache, G. Researches in the field of the energetics of the miscanthus planter. (1) - Determination of the traction force (2015) UPB Scientific Bulletin, Series D: Mechanical Engineering, 77 (1), pp. 245-256.

Poenaru Ion, C., Paraschiv, G., Gheorghe, V., Moiceanu, G., Sorin, S.B., Vladut, V. Studies regarding the working process executed on ploughshare of planting machines (2012) Engineering for Rural Development, 11, pp. 22-26.

Tomozei, C., Nedeff, F., Paraschiv, G., Irimia, O., Ardeleanu, G., Petrovici, A.C. Mathematical modelling of sound pressure level attenuation transmitted by an acoustic screen in industrial environment (2014) Environmental Engineering and Management Journal, 13 (7), pp. 1743-1749.

Vîlcu, C., Voicu, G., Paraschiv, G., Manole, E.S., Lehr, C., Nedea, A., Borzea, C.I. System for dynamic monitoring and warning in case of ecological risk for surface waters (2014) Environmental Engineering and Management Journal, 13 (7), pp. 1757-1764.

Constantin, G.A., Voicu, G., Stefan, E.M., Paraschiv, G., Muşuroi, G. Physical properties of the grist fractions at the second reduction passage of a milling plant [Proprietǎţile fizice ale fracţiilor de mǎciniş la al doilea pasaj de mǎcinare al unei mori de grâu] (2014) INMATEH - Agricultural Engineering, 43 (2), pp. 119-126.

Constantin, G.A., Voicu, G., Ştefan, M.E, Paraschiv, G Research of the grist dimensional characteristics of the second-matter grinding in an industrial wheat mill [Cercetarea caracteristicilor dimensionale ale mǎcinişului celui de-al doilea şrot într-o moarǎ de grâu industrialǎ] (2013) INMATEH - Agricultural Engineering, 39 (1), pp. 71-78.

Bucur, R.D., Cimpeanu, C., Barbuta, M., Ciobanu, G., Paraschiv, G., Harja, M. A comprehensive characterization of ash from Romania thermal power plant (2014) Journal of Food, Agriculture and Environment, 12 (2), pp. 943-949.

Nadabaica, D.-C., Radkowski, S., Nedeff, V., Paraschiv, G., Barsan, N., Nicolescu, M.C. Experimental study of noise levels generated by rolling bearings in different stages of deterioration (2014) Environmental Engineering and Management Journal, 13 (7), pp. 1631-1639.

Sebesan, I., Paraschiv, G., Zaharia, N.L. Test determination of mechanical characteristics for rubber plates used at K railway fastening system (2012) Materiale Plastice, 49 (3), pp. 192-195.

Ionescu, G., Stefani, P. Environmental assessment of waste transport and treatment: A case study (2014) WIT Transactions on Ecology and the Environment, 180, pp. 175-185.

Ionescu, G., Apostol, T., Rada, E.C., Ragazzi, M., Torretta, V. Critical analysis of strategies for PM reduction in urban areas (2013) UPB Scientific Bulletin, Series D: Mechanical Engineering, 75 (2), pp. 175-186

Norişor, M., Badea, A., Dincǎ, C. Economical and technical analysis of CO<inf>2</inf> transport ways (2012) UPB Scientific Bulletin, Series C: Electrical Engineering, 74 (1), pp. 127-138.

Toma, L., Otomega, B., Bulac, C., Tristiu, I. Coordination of distributed generators through the virtual power plant concept (2012) IEEE PES Innovative Smart Grid Technologies Conference Europe, art. no. 6465769.

Toma, L., Otomega, B., Tristiu, I. Market strategy of distributed generation through the virtual power plant concept (2012) Proceedings of the International Conference on Optimisation of Electrical and Electronic Equipment, OPTIM, art. no. 6231838, pp. 81-88

Triştiu, I., Bulac, C., Costinaş, S., Toma, L., Mandiş, A., Zəbavə, T. A new and efficient algorithm for short-circuit calculation in distribution networks with distributed generation (2015) 2015 9th International Symposium on Advanced Topics in Electrical Engineering, ATEE 2015, art. no. 7133915, pp. 816-821.

Torretta, V., Rada, E.C., Panaitescu, V., Apostol, T. Some considerations on particulate generated by traffic (2012) UPB Scientific Bulletin, Series D: Mechanical Engineering, 74 (4), pp. 241-248.

Ionescu, G., Rada, E.C., Cioca, L.I. Municipal solid waste sorting and treatment schemes for the maximization of material and energy recovery in a latest EU member,(2015) Environmental Engineering and Management Journal, 14 (11), pp. 2537-2544.

Rada, E.C., Istrate, I.A., Panaitescu, V., Ragazzi, M., Cirlioru, T.M., Apostol, T. A comparison between different scenarios of Romanian municipal solid waste treatment before landfilling (2010) Environmental Engineering and Management Journal, 9 (4), pp. 589-596.

Rada, E.C., Franzinelli, A., Taiss, M., Ragazzi, M., Panaitescu, V., Apostol, T. Lower heating value dynamics during municipal solid waste bio-drying (2007) Environmental Technology, 28 (4), pp. 463-469.

Rada, E.C., Ragazzi, M., Panaitescu, V., Apostol, T. Experimental characterization of municipal solid waste bio-drying (2006) WIT Transactions on Ecology and the Environment, 92, pp. 295-302.

Rada, E.C., Ragazzi, M., Panaitescu, V., Apostol, T. The role of bio-mechanical treatments of waste in the dioxin emission inventories (2006) Chemosphere, 62 (3), pp. 404-410.

Cioranu, S.-I., Grigoriu, M., Ragazzi, M., Rada, E.C., Ionescu, G. Assessment of alternatives for rmsw treatment for Valcea County, Romania (2014) Revista de Chimie, 65 (3), pp. 257-261.

Cioranu, S.I., Badea, A. Different strategies for MSW management in two Romanian cities: Selective collection versus bio-drying (2013) UPB Scientific Bulletin, Series D: Mechanical Engineering, 75 (3), pp. 151-158.

Ranieri, E., Antognoni, S., Istrate, I.A., Apostol, T. Municipal solid waste management in italian and romanian tourist areas (2014) UPB Scientific Bulletin, Series D: Mechanical Engineering, 76 (2), pp. 277-288.

Marculescu, C., Antonini, G., Badea, A., Apostol, T. Pilot installation for the thermo-chemical characterisation of solid wastes (2007) Waste Management, 27 (3), pp. 367-374.

Gheorghe, C., Dinu, R., Marculescu, C., Badea, A., Apostol, T.Two-phase pyrolysis modelling of wooden waste (2008) WIT Transactions on Ecology and the Environment, 109, pp. 31-38.

Negoi, R.M., Ragazzi, M., Apostol, T., Rada, E.C., Mǎrculescu, C. Bio-drying of romanian municipal solid waste: An analysis of its viability (2009) UPB Scientific Bulletin, Series C: Electrical Engineering, 71 (4), pp. 193-204.

Collaguazo, G., Badea, A., Stan, C., Pásztai, Z. Household wastes characterization and seasonal variations in Bihor County, Romania (2016) UPB Scientific Bulletin, Series C: Electrical Engineering, 78 (1), pp. 281-290.

Moiceanu, G., Voicu, G., Ferdeş, M., Paraschiv, G., Dincă, M.N., Vlăduş, V., Gageanu, I., Chiţoiu, M. Comparative study on biogas production using cow and swine manure mixed with Miscanthus x giganteus as substrate (2016) Romanian Biotechnological Letters, 21 (5), pp. 11968-11973.

Ciuta, S., Schiavon, M., Chistè, A., Ragazzi, M., Rada, E.C., Tubino, M., Badea, A., Apostol, T. Role of feedstock transport in the balance of primary PM emissions in two case-studies: RMSW incineration vs. sintering plant (2012) UPB Scientific Bulletin, Series D: Mechanical Engineering, 74 (1), pp. 211-218.

Castagna, A., Casagranda, M., Zeni, A., Girelli, E., Rada, E.C., Ragazzi, M., Apostol, T. 3R'S from citizens point of view and their proposal from a case-study (2013) UPB Scientific Bulletin, Series D: Mechanical Engineering, 75 (4), pp. 253-264.

Dinca, C., Badea, A., Rousseaux, P., Apostol, T. A multi-criteria approach to evaluate the natural gas energy systems (2007) Energy Policy, 35 (11), pp. 5754-5765.

Tanasiev, V., Necula, H., Darie, G., Badea, A. Web service-based monitoring system for smart management of the buildings (2016) Proceedings of the 2016 International Conference and Exposition on Electrical and Power Engineering, EPE 2016, art. no. 7781296, pp. 025-030.

Varlam, M., Culcer, M., Enache, A., Raceanu, M., Iliescu, M., Badea, A., Stefanescu, I. A Hydrogen-based peak power management unit (2012) UPB Scientific Bulletin, Series C: Electrical Engineering, 74 (1), pp. 33-38.

Picu, R., Zorio, M., Badea, A. Optimization of data processing in doping control by the use of programming facilitations (2011) Proceedings of the European Computing Conference, ECC '11, pp. 46-49.

Toma, L., Tristiu, I., Bulac, C., Neagoe-Stefana, A.-G. Optimal generation scheduling strategy in a microgrid (2016) 2016 IEEE Transportation Electrification Conference and Expo, Asia-Pacific, ITEC Asia-Pacific 2016, art. no. 7513004, pp. 491-496.

Antognoni, S., Ragazzi, M., Ionescu, G., Passamani, G., Zanoni, S., Rada, E.C., Torretta, V. Respirometric index as a tool for biogas generation production from poultry manure (2016) Management of Environmental Quality, 27 (3), pp. 269-280.

Ragazzi, M., Torretta, V., Ionescu, G., Istrate, I.A. Maintenance strategies and local impact of MSW incinerators (2013) WIT Transactions on Ecology and the Environment, 176, pp. 235-244.

Ionescu, G., Zardi, D., Tirler, W., Rada, E.C., Ragazzi, M. A critical analysis of emissions and atmospheric dispersion of pollutants from plants for the treatment of residual municipal solid waste (2012) UPB Scientific Bulletin, Series D: Mechanical Engineering, 74 (4), pp. 227-240.

Ionescu, G., Rada, E.C., Ragazzi, M., Mǎrculescu, C., Badea, A., Apostol, T. Integrated municipal solid waste scenario model using advanced pretreatment and waste to energy processes (2013) Energy Conversion and Management, 76, pp. 1083-1092.

Mǎrculescu, C., Ionescu, G., Ciutǎ, S., Stan, C. Energetic analysis of meat processing industry waste (2013) UPB Scientific Bulletin, Series C: Electrical Engineering, 75 (2), pp. 291-300.

Mǎrculescu, C., Stan, C., Badea, A. Energetic potential assessment of poultry waste processing industry (2012) Environmental Engineering and Management Journal, 11 (9), pp. 1567-1572.

Ciuta, M.S., Mǎrculescu, C., Dincǎ, C., Badea, A. Primary characterization of wine making and oil refining industry wastes (2011) UPB Scientific Bulletin, Series C: Electrical Engineering, 73 (3), pp. 307-320.

Ciuta, S., Schiavon, M., Chistè, A., Ragazzi, M., Rada, E.C., Tubino, M., Badea, A., Apostol, T.Role of feedstock transport in the balance of primary PM emissions in two case-studies: RMSW incineration vs. sintering plant (2012) UPB Scientific Bulletin, Series D: Mechanical Engineering, 74 (1), pp. 211-218.

Ciuta, S., Antognoni, S., Rada, E.C., Ragazzi, M., Badea, A., Cioca, L.I. Respirometric index and biogas potential of different foods and agricultural discarded biomass (2016) Sustainability (Switzerland), 8 (12), art. no. 1311 .

Ciuta, S., Torretta, V., Trulli, E., Apostol, T. Comparison between two cases study on water kiosks (2012) UPB Scientific Bulletin, Series D: Mechanical Engineering, 74 (4), pp. 211-218.

Stan, C., Badea, A. Thermo-physico-chemical analyses and calorific value of poultry processing industry waste (2013) UPB Scientific Bulletin, Series C: Electrical Engineering, 75 (4), pp. 277-284

Istrate, I.A., Cocarta, D.M., Bulmau, C., Badea, A. The influence of pH and ORP for the efficiency of electrochemical treatment applied for organic polluted soils (2013) Revista de Chimie, 64 (11), pp. 1250-1254.

Istrate, I., Cocarta, D., Neamtu, S., Cirlioru, T. The treatment of PCB polluted soil-the approach based on the application of electrochemical treatment (2013) Water, Air, and Soil Pollution, 224 (4), art. no. 1516,

Istrate, I.A., Grigoriu, M., Badea, A., Rada, E.C., Ragazzi, M., Andreottola, G. The assessment of chemical and electrochemical treatment for the remediation of diesel contaminated soils (2010) Proceedings of the International Conference on Risk Management, Assessment and Mitigation, RIMA '10, pp. 144-149.

Istrate, I., Badea, A., Bulmǎu, C., Apostol, T. The assessment of a new technology used for the treatment of petroleum contaminated soils - Laboratory study (2012) UPB Scientific Bulletin, Series D: Mechanical Engineering, 74 (1), pp. 187-194.

Bulmau, C., Neamtu, S., Cocarta, D.M., Istrate, I., Badea, A. Efficiency of PAHs removal from soils contaminated with petroleum products using ex-situ thermal treatments (2013) Revista de Chimie, 64 (12), pp. 1430-1435.

Cocarta, D., Oprea, I.A., Ragazzi, M., Andreottola, G., Ziglio, G., Badea, A., Apostol, T. Different technologies for the treatment of PAH contaminated sediments and consequences on human health individual risk (2008) WIT Transactions on Ecology and the Environment, 110, pp. 53-60.

Cocârţă, D.M., Neamţu, S., Reşetar Deac, A.M. Carcinogenic risk evaluation for human health risk assessment from soils contaminated with heavy metals (2016) International Journal of Environmental Science and Technology, 13 (8), pp. 2025-2036.

Cocarta, D.M., Rada, E.C., Ragazzi, M., Badea, A., Apostol, T. A contribution for a correct vision of health impact from municipal solid waste treatments (2009) Environmental Technology, 30 (9), pp. 963-968.

Cocarta, D.M., Istrate, I.A., Bulmau, C., Dinu, R., Tanasiev, V., Dumitrescu, C. Different methods for polychlorinated biphenyls removal from contaminated soils (2014) Revista de Chimie, 65 (1), pp. 44-49.

Oprea, I., Badea, A., Ziglio, G., Ragazzi, M., Andreottola, G., Ferrarese, E., Apostol, T. The remediation of contaminated sediments by chemical oxidation (2009) UPB Scientific Bulletin, Series C: Electrical Engineering, 71 (1), pp. 131-142.

Streche, C., Istrate, I.A., Badea, A. The treatment of diesel contaminated soil by dcts methods (2013) UPB Scientific Bulletin, Series C: Electrical Engineering, 75 (4), pp. 299-311.

Dumitrescu, C., Cocârţǎ, D.M., Badea, A. An integrated modeling approach for risk assessment of heavy metals in soils (2012) UPB Scientific Bulletin, Series D: Mechanical Engineering, 74 (3), pp. 217-228.

Bulmǎu, C., Cocârţǎ, D. Behaviour of pcbs in remediation by oxygen free thermal treatments of an artificially contaminated soil (2014) UPB Scientific Bulletin, Series C: Electrical Engineering and Computer Science, 76 (3), pp. 207-214.

Lǎcǎtuşu, A.-R., Cocârţǎ, D., Lǎcǎtuşu, R. Ex-situ bioremediation efficiency in removing organic and inorganic compounds from artificially and anthropogenic contaminated soils (2013) Carpathian Journal of Earth and Environmental Sciences, 8 (1), pp. 59-70.

Rada, E.C., Franzinelli, A., Ragazzi, M., Panaitescu, V., Apostol, T. Modelling of PCDD/F release from MSW bio-drying (2007) Chemosphere, 68 (9), pp. 1669-1674.

Rada, E.C., Ragazzi, M., Badea, A. MSW Bio-drying: Design criteria from A 10 years research (2012) UPB Scientific Bulletin, Series D: Mechanical Engineering, 74 (3), pp. 209-216.

Ragazzi, M., Rada, E.C., Marconi, M., Chistè, A., Fedrizzi, S., Segatta, G., Schiavon, M., Ionescu, G. Characterization of the PCDD/F in the Province of Trento (2014) Energy Procedia, 50, pp. 945-952.

Ranieri, E., Gorgoglione, A., Ionescu, G. A sustainable solution for Ethylbenzene removal: Horizontal subsurface flow constructed wetlands treatment (2016) Fresenius Environmental Bulletin, 25 (6), pp. 2183-2192.

Stan, C., Zapciu, M., Paraschiv, M., Ungureanu, M. 3D parametric modeling for complex parts generation (2013) Applied Mechanics and Materials, 371, pp. 504-508.

Istrate, I.A., Badea, A., Andreottola, G., Ziglio, G., Apostol, T. Electrochemical remediation - Efficiency vs treatment configuration (2010) UPB Scientific Bulletin, Series D: Mechanical Engineering, 72 (1), pp. 51-58.

Badea, A., Gheorghe, C., Mǎrculescu, C., Apostol, T. L'influence des proprietes physiques du bois et des parametres du processus sur les produits de pyrolyse (2008) UPB Scientific Bulletin, Series C: Electrical Engineering, 70 (2), pp. 103-110.

Badea, A., Gheorghe, C., Mǎrculescu, C., Minciuc, E. Biomass pyrolysis experimental investigations (2008) UPB Scientific Bulletin, Series C: Electrical Engineering, 70 (3), pp. 129-138.

Bulmau, C., Mǎrculescu, C., Badea, A., Apostol, T. Pyrolysis parameters influencing the bio-char generation from wooden biomass (2010) UPB Scientific Bulletin, Series C: Electrical Engineering, 72 (1), pp. 29-38.

Gheorghe, C., Marculescu, C., Badea, A., Dinca, C., Apostol, T. Effect of pyrolysis conditions on bio-char production from biomass (2009) Proceedings of the 3rd WSEAS International Conference on Energy Planning, Energy Saving, Environmental Education, EPESE '09, Renewable Energy Sources, RES '09, Waste Management, WWAI '09, pp. 239-241.

Dinca, C. Critical parametric study of circulating fluidized bed combustion with CO<inf>2</inf> chemical absorption process using different aqueous alkanolamines (2016) Journal of Cleaner Production, 112, pp. 1136-1149.

Dinu, R., Badea, A., Apostol, T., Marculescu, C., Minciuc, E., Kuncser, R. Experimental investigation on mass loss, ignition time and flame behaviour of biomass in HTAC furnaces (2009) UPB Scientific Bulletin, Series C: Electrical Engineering, 71 (2), pp. 155-166.

Necula, H., Lallemand, M., Badea, A., Marvillet, C. Modelling of a shell-and-tube evaporator using the zeotropic mixture R-407C [Simulation du fonctionnement d'un évaporateur à tubes et calandre utilisant le mélange zéotropique R407C] (2001) International Journal of Refrigeration, 24 (7), pp. 718-727.

Costinas, S., Tristiu, I., Sava, G.N., Opris, I., Tanasiev, V. A new mathematical model for assessing optimization decisions of the loading factor flowing through substation transformers (2015) 2015 IEEE 15th International Conference on Environment and Electrical Engineering, EEEIC 2015 - Conference Proceedings, art. no. 7165503, pp. 2109-2114.

Barbuta, M., Marin, E., Cimpeanu, S.M., Paraschiv, G., Lepadatu, D., Bucur, R.D. Statistical analysis of the tensile strength of coal fly ash concrete with fibers using central composite design (2015) Advances in Materials Science and Engineering, 2015, art. no. 486232,

Paraschiv, G., Dobrotǎ, D. Research on deformations which appear in within the metal structures of mining equipment (2014) Metalurgija, 53 (4), pp. 657-660.

Cantaragiu, A.-M., Fetecau, C., Paraschiv, G. Effect of carbon nanotubes concentration on creep behaviour of polypropylene-carbon nanotubes nanocomposites (2015) Materiale Plastice, 52 (1), pp. 69-74.

Bozgă, I., Sărăcin, I., Paraschiv, G., Pandia, O., Andronie, I.C. The influence of melted material proprieties over the characteristics of welded jointings made from steel OL 52.4k (2015) Metalurgija, 54 (3), pp. 535-538.

Sărăcin, I., Paraschiv, G., Pandia, O., Bozgă, I., Toma, D. Researches on corrosion cracking phenomenon that occu rs on welded of agricultural equipment (2015) Metalurgija, 54 (2), pp. 395-398.

Rusanescu, C.O., Jinescu, C., Paraschiv, G., Biris, S.S., Rusanescu, M., Ghermec, O. Influence of the Nb, V and Mo elements on the ecological micro-alloyed steel properties (2015) Revista de Chimie, 66 (5), pp. 754-757.

Voicea, I., Danciu, A., Selvi, K.Ç., Vlǎduţ, V., Voicu, G., Paraschiv, G., Grigore, I. Integrated technology for obtaining agripellets [Tehnologie integratǎ de obţinere a agripeletilor] (2014) INMATEH - Agricultural Engineering, 42 (1), pp. 129-136.

Covaliu, C.I., Jitaru, I., Paraschiv, G., Vasile, E., Biriş, S.-T., Diamandescu, L., Ionita, V., Iovu, H. Core-shell hybrid nanomaterials based on CoFe2O4 particles coated with PVP or PEG biopolymers for applications in biomedicine (2013) Powder Technology, 237, pp. 415-426

Voicu, G., Stefan, E.-M., Constantin, G.-A., Biris, S.-S., Paraschiv, G. Rheological behaviour to cone penetration of dough from different wheat flour types (2013) Advanced Science Letters, 19 (2), pp. 679-684.

Parausanu, I., Hadar, A., Paraschiv, G., Visan, D.C. Dynamic behaviour of an elastic orthotropic shaft (2013) Materiale Plastice, 50 (2), pp. 106-112.

Biriş, S.-S., Vlǎduţ, V., Ungureanu, N., Paraschiv, G., Voicu, G. Development and experimental testing of a FEM model for the stress distribution analysis in agricultural soil due to artifi cial compaction (2009) Agriculturae Conspectus Scientificus, 74 (1), pp. 21-29

Biriş, S.-S., Maican, E., Paraschiv, G., Vlǎduţ, V., Bungescu, S. A model for prediction of stress state in soil below agricultural tyres using the finite element method (2007) UPB Scientific Bulletin, Series D: Mechanical Engineering, 69 (4), pp. 19-28.

Mǎrculescu, C., Badea, A., Apostol, T. Two-stage gasification process of solid organic compounds (2010) UPB Scientific Bulletin, Series C: Electrical Engineering, 72 (1), pp. 21-28.

PROVED

Articole

Meniu secundar